ZHEJIANG SAK ELECTRONICS CO.,LTD
ZHEJIANG SAK ELECTRONICS CO.,LTD RJ11 connector, RJ45 connector, RJ45 connector with USB manufacturing
Add to Cart
PBT Black Plastic RJ11 RJ45 Jack Cat6 Jack Modular Connector 4P4C Single Port
Spectifications
| Contact | Phosphor Bronze, 6u-inch gold flashed unless specified |
| Housing | Thermoplastic LCP UL94V-0 rated |
| Operating Temperature | 0℃ --70℃ |
| Storage temperature | -40℃--85℃ |
| Turns Ratio | Tx & Rx+1:1±5% |
| Insertion Loss | 1-30MHz:-1.0dB Max |
| Return Loss:1-30MHz | -16dB Min; 60-80MHz:12dB Min |
| Common Mode Rejection | 1-100MHz:-30dB Min;200MHz:-20dB Min |
| Crosstalk | 1-100MHz:-30dB Min |
| OCL | 100KHz,0.1V,8MADC:350uH Min |
| Hi-Pot | 1500VAC,1mA,1Sec |
MECHNICAL:
1. HOUSING MATERIAL:glass filled polyester(UL94V-0).
2. CONTACT MATERIAL:phosphor bronze T=0.46mm (C5 100).
3. PLATING:glod plating over nickel.
4. DURRABILITY:750 cycles min.
5. PCB RETENTION PRE-SOLDER:1 LB min.
6. PCB RETENTION POST-SOLDER:10 LB min.
ENVIRONMENTAL:
1. STORAGE:-40℃ TO +85℃.
2. OPERATION:0℃ TO 70℃
3. WAVE SOLDER TEMPERTURE:230-250℃(5-10 seconds)
Unit Price
Charge only 35% ~ 60% of Pulse , Wurth(Midcom), Bothhand Belfuse, Tyco, Halo,....Etc
All the step are doing by ourself. So we can control the cost
PHC have more than 30 units automation equipments to product as possible
PHC consists of 3 subordinations , located partly in Hunan ,Hubei ,Guangdong .
With large scale of production lines, we can reach to cost reduction at the most extent
Production&Testing
PHC have more than 30 units automation equipments to product as possible
PHC Every Magnetic RJ45 tested 3times (not just batch tested)
PHC Every SMT part used Automation testing and packing.